BLDC controller 16 kW
Technical data
| Maximum power | 16 kW |
|---|---|
| Supply voltage | 48–86 V |
| Max. current to the motor for 20 s | 400 A |
| Max. current draw for 20 s | 220 A |
| Maximum continuous current draw | 140 A |
- Length
- 19 cm
- Width
- 12 cm
- Height
- 6 cm
- Weight
- 2.1 kg
Price€418gross
- Warranty
- VAT invoice
In the boxController, cable with potentiometer, user manual
Give the code when ordering POWER, and you'll get a 5% discount on your order.
Description
Applications
With this device you can smoothly control the speed of a boat, motorcycle, go-kart or other vehicle.
Speed control
Electronic speed controller for brushless BLDC motors. It provides smooth control of the motor speed.
- Connect the controller according to the drawing.
- Connect the motor's yellow, green and blue wires to the controller.
- Make the connections with cable of at least 35mm2.
- Connect the supply minus with the black wire.
- Connect the supply plus with the red wire.
- Connect the thin orange wire to the switch.
- Connect the switch to the red power wire.
- Before switching the controller on, set the potentiometer to zero (start of the range).
- The switch turns the motor on at any moment of operation.
- A 300A fuse should also be connected to the power supply.
- After longer continuous operation, check how hot the controller housing gets.
- If the housing is too hot to hold in your hand, fit a fan for cooling.
The leads connecting the controller to the motor should be as short as possible.
Ask about BLDC controller 16 kW