DC controller 4.8 kW
Technical data
| Maximum power | 4.8 kW |
|---|---|
| Supply voltage | 9–60 V |
| Max. current to the motor for 20 s | 80 A |
| Maximum continuous current draw | 60 A |
- Length
- 165 mm
- Width
- 130 mm
- Height
- 45 mm
- Weight
- 1.1 kg
Price€89gross
- Warranty
- Invoice
In the boxController, potentiometer, direction switch, user manual
Give the code when ordering POWER, and you'll get a 5% discount on your order.
Description
Applications
With this device you can smoothly control the speed of a boat, bicycle, scooter, motorcycle, go-kart or other vehicle.
Speed control
Electronic speed controller for brushed motors, used to control the motor speed.
- To draw heat away from the housing, fix the controller to a heat sink or the vehicle's metal body.
- Connect a brushed electric motor with a starting current of no more than 80A to the controller.
- Make the connections with cable of at least 10mm2.
- Connect the supply minus to the blue wire.
- Connect the supply plus to the red wire.
- The potentiometer switches the motor on and controls its speed.
- The switch changes the motor's direction of rotation.
- A 80A fuse should also be connected to the power supply.
- After longer continuous operation, check how hot the housing gets.
- If the controller housing is too hot to hold in your hand, fit a fan for cooling.
While the motor is running at speed, do not flip the right/left direction switch or switch it off with the potentiometer. Only do this at low speed, around ...400 rpm. When the switch or the potentiometer is set to zero, the motor is braked.
Ask about DC controller 4.8 kW