DC controller 57 kW
Technical data
| Maximum power | 57 kW |
|---|---|
| Supply voltage | 18–180 V |
| Maximum current for 20 s | 400 A |
| Max. continuous current draw | 200 A |
- Length
- 25 cm
- Width
- 16 cm
- Height
- 8.5 cm
- Weight
- 3.4 kg
Price€1621gross
- Warranty
- Invoice
In the boxController, cable with potentiometer, manual
Give the code when ordering POWER, and you'll get a 5% discount on your order.
Description
Applications
With this device you can control the speed of a scooter, motorcycle, go-kart, boat, car or other vehicle.
Speed control
Electronic controller for brushed DC motors with energy recovery when braking. It provides smooth control of the motor speed.
- Fix the device to the vehicle's metal frame or body so that heat is drawn away from the controller housing.
- Connect a brushed electric motor with a starting current of no more than 400A to terminals B+ and M.
- Make the connections with cable of at least 50mm2.
- Connect the supply minus to terminal B-.
- Connect the supply plus to terminal B+.
- Insert the plug of the potentiometer cable into socket J2.
- Connect the switch to the red wire and to the + terminal of the 12V battery.
- To start the motor, the speed potentiometer should be set to zero.
- The switch turns the motor off at any moment of operation.
- The speed potentiometer controls the motor speed.
- The brake potentiometer sets the recovery current when braking.
- When braking, the brake switch should be on.
- A 400A fuse should also be connected to the power supply.
- After longer continuous operation, check how hot the controller housing and terminal M get.
- If the wire terminals or the housing are too hot to hold in your hand, they can be cooled with a fan.
The leads connecting the controller to the motor should be as short as possible. They are best joined by soldering, with heat-shrink tubing put over the soldered joint.
Ask about DC controller 57 kW