Induction controller 14 kW
Technical data
| Maximum power | 14 kW |
|---|---|
| Supply voltage | 40–90 V |
| Maximum current draw for 20s | 200 A |
| Maximum continuous current draw | 100 A |
- Length
- 19.5 cm
- Width
- 12.5 cm
- Height
- 8.5 cm
- Weight
- 1.3 kg
Price€345gross
- Warranty
- Invoice
In the boxController, potentiometer, encoder, resistor, user manual
Give the code when ordering POWER, and you'll get a 5% discount on your order.
Description
Applications
With this device you can smoothly control the speed of a boat, motorcycle, go-kart, car or other vehicle.
Speed control
Electronic speed controller for induction motors, used to control the motor speed.
- Connect the controller according to the drawing.
- Connect the motor to terminals W, V and U.
- Make the connections with cable of at least 20mm2.
- Connect the supply minus to terminal -.
- Connect the supply plus to terminal +.
- Connect the thin red wire to the switch.
- Connect the switch to terminal +.
- Before switching the controller on, set the potentiometer to zero (start of the range).
- The switch turns the motor on at any moment of operation.
- A 200A fuse should also be connected to the power supply.
- After longer continuous operation, check how hot the controller housing and the wire terminals get.
- If the wire terminals or the housing are too hot to hold in your hand, fit a fan for cooling.
The leads connecting the controller to the motor should be as short as possible and well insulated; put insulating tubing over the joint.
Ask about induction controller 14 kW