Induction controller 36 kW
Technical data
| Maximum power | 36 kW |
|---|---|
| Supply voltage | 18–90 V |
| Maximum current draw for one minute | 500 A |
| Maximum continuous current draw | 192 A |
- Length
- 28.5 cm
- Width
- 18.5 cm
- Height
- 8 cm
- Weight
- 3.1 kg
Price€864gross
- Warranty
- Invoice
In the boxController, cable with potentiometer, encoder, user manual
Give the code when ordering POWER, and you'll get a 5% discount on your order.
Description
Applications
With this device you can smoothly control the speed of a boat, motorcycle, go-kart, car or other vehicle.
Speed control
Electronic controller for induction motors, providing smooth control of the motor speed.
- Connect the controller according to the drawing.
- Connect the motor to terminals U V W.
- Make the connections with cable of at least 50mm2.
- Connect the supply minus to terminal -.
- Connect the supply plus to terminal +.
- Connect the thin red wire to the switch.
- Connect the switch to terminal +.
- Before switching the controller on, set the potentiometer to zero (start of the range).
- The switch turns the motor on at any moment of operation.
- A 500A fuse should also be connected to the power supply.
- After longer continuous operation, check how hot the controller housing and the wire terminals get.
- If the wire terminals or the housing are too hot to hold in your hand, fit a fan for cooling.
The leads connecting the controller to the motor should be as short as possible. They are best joined by soldering, with heat-shrink tubing put over the soldered joint.
Ask about induction controller 36 kW