Induction controller 50 kW
Technical data
| Maximum power | 50 kW |
|---|---|
| Supply voltage | 18–136 V |
| Maximum current draw for 20 s | 460 A |
| Maximum continuous current draw | 230 A |
- Length
- 30 cm
- Width
- 20 cm
- Height
- 10 cm
- Weight
- 4.5 kg
Price€1382gross
- Warranty
- Invoice
In the boxController, cable with potentiometer, encoder, user manual
Give the code when ordering POWER, and you'll get a 5% discount on your order.
Description
Applications
With this device you can smoothly control the speed of boats, motorcycles, go-karts, cars and other vehicles.
Speed control
Electronic speed controller for induction motors with energy recovery.
Energy recovery
The controller has energy recovery: when going downhill and braking, the motor acts as a generator and charges the batteries.
- Connect the motor to terminals W, V and U exactly as shown in the drawing.
- Make the connections with cable of at least 50mm2.
- Connect the supply minus to terminal -.
- Connect the supply plus to terminal +.
- Connect the thin red wire to the plus of the 12V battery.
- Connect the thin black wire to the minus of the 12V battery.
- Make the connections according to the drawing.
- Before switching the controller on, set the potentiometer to zero (start of the range).
- The switch turns the motor on at any moment of operation.
- A 500A fuse should also be connected to the power supply.
- After longer continuous operation, check how hot the controller housing and the wire terminals get.
- If the wire terminals or the housing are too hot to hold in your hand, cool them with a fan.
The leads connecting the controller to the motor should be as short as possible. They are best joined by soldering, with heat-shrink tubing put over the soldered joint.
Ask about induction controller 50 kW