BLDC drive kit 4 kW 10 Nm
Technical data
| Supply voltage | 18–85 V |
|---|---|
| Max. power for 20 seconds | 4 kW |
| Max. continuous power | 2 kW |
| Max. current for 20 seconds | 60 A |
| Max. continuous current | 30 A |
| No-load speed | 5000 rpm |
| Speed at max. power | 3500 rpm |
| Max. torque | 10 Nm |
| Weight | 3.3 kg |
Motor
View| Type | BLDC |
|---|---|
| Power | 10 kW |
| Torque | 10 Nm |
| Weight | 2.9 kg |
Controller
View| Type | BLDC |
|---|---|
| Power | 4 kW |
| Voltage | 18–85 V |
| Current | 60 A |
| Weight | 0.27 kg |
Price€425gross
- Warranty
- Invoice
In the boxMotor, controller with potentiometer, manual
Give the code when ordering POWER, and you'll get a 5% discount on your order.
Description
Applications
Recommended use: driving scooters, motorcycles, go-karts, quads, trikes, buggies, light vehicles, dinghies, small boats, motorboats and other light vessels. For pumps, lifts, winches and devices that need a soft start.
Air cooling
The better the motor is cooled, the longer it runs at full power. For more cooling, two strong fans can be fitted on the sides of the motor.
Power and current
When the motor is very well cooled, it can draw 30A continuously, reaching 2kW, and 20A for 60 seconds, reaching 4kW. The motor temperature must not exceed 90°C.
Power and speed
The motor's power and speed depend on the voltage: the higher the voltage, the more power and speed the motor reaches. Supplied with 85V, it reaches about 3500 rpm at maximum power.
The leads connecting the controller to the motor should be as short as possible. Solder the joint and protect it with heat-shrink tubing.