BLDC drive kit 8 kW 20 Nm
Technical data
| Supply voltage | 18–84 V |
|---|---|
| Max. power for 20 seconds | 8 kW |
| Max. continuous power | 4 kW |
| Max. current for 20 seconds | 120 A |
| Max. continuous current | 60 A |
| No-load speed | 5000 rpm |
| Speed at max. power | 3800 rpm |
| Max. torque | 20 Nm |
| Weight | 5 kg |
Motor
View| Type | BLDC |
|---|---|
| Power | 16 kW |
| Torque | 20 Nm |
| Weight | 4.5 kg |
Controller
View| Type | BLDC |
|---|---|
| Power | 8 kW |
| Voltage | 18–84 V |
| Current | 120 A |
| Weight | 0.45 kg |
Price€747gross
- Warranty
- Invoice
In the boxMotor, controller with potentiometer, manual
Give the code when ordering POWER, and you'll get a 5% discount on your order.
Description
Applications
Recommended use: driving scooters, motorcycles, go-karts, quads, trikes, buggies, light vehicles, dinghies, small boats, motorboats and other light vessels. For pumps, lifts, winches and devices that need a soft start.
Air cooling
The motor's power depends on cooling: the better it is cooled, the longer it runs at full power. For more cooling, two strong fans can be fitted on the sides of the motor.
Power and current
When the motor is very well cooled, it can draw 60A continuously, reaching 4kW, and 20A for 120 seconds, reaching 8kW. The motor temperature must not exceed 90°C.
Speed
The motor's speed depends on the voltage: the higher the voltage, the higher the speed. Supplied with 84V, it reaches about 3800 rpm at maximum power.
The leads connecting the controller to the motor should be as short as possible. They should be joined by soldering, with heat-shrink tubing put over the soldered joint.