Induction drive kit 22 kW 75 Nm
Technical data
| Supply voltage | 40–100 V |
|---|---|
| Max. power for 20 seconds | 22 kW |
| Max. continuous power | 11 kW |
| Max. current for 20 seconds | 400 A |
| Max. continuous current | 200 A |
| No-load speed | 5000 rpm |
| Speed at max. power | 2800 rpm |
| Max. torque | 75 Nm |
| Weight | 21.6 kg |
Motor
View| Type | Induction |
|---|---|
| Power | 62 kW |
| Torque | 90 Nm |
| Weight | 20 kg |
Controller
View| Type | Induction |
|---|---|
| Power | 25 kW |
| Voltage | 40–100 V |
| Current | 400 A |
| Weight | 1.6 kg |
Price€2025gross
- Warranty
- Invoice
In the boxMotor, controller with encoder, manual
Give the code when ordering POWER, and you'll get a 5% discount on your order.
Description
Applications
Recommended use: driving scooters, motorcycles, go-karts, quads, trikes, buggies and other vehicles, as well as dinghies, boats, motorboats, catamarans and other vessels. For pumps, lifts, winches and devices that need a soft start.
Oil cooling
If the motor's full power is used rarely and briefly, pouring about 1 l of Reniso KM32 oil (used in refrigeration) into the motor is enough. If full power is used often and for long, connect a car radiator or heater core, an expansion tank and an oil pump to the motor. Fill the cooling system with enough oil for it to circulate evenly. The motor temperature should not exceed 90°C.
Power and current
When the motor is supplied with 100V and very well cooled with oil, it can draw 200A continuously, reaching 11kW, and 20A for 400 seconds, reaching 22kW.
Speed
The motor's speed depends on its supply voltage: the higher the voltage, the higher the speed. Supplied with 100V, it reaches about 2800 rpm at maximum power.
The leads connecting the controller to the motor should be as short as possible. They are best joined by soldering, with heat-shrink tubing put over the soldered joint.