Oil-cooled asynchronous induction motor 100 kW
Technical data
| Parameter | 48 V | 72 V | 110 V | 220 V |
|---|---|---|---|---|
| Max. power for 20 seconds | 22 kW | 33 kW | 50 kW | 100 kW |
| Max. continuous power | 15 kW | 22 kW | 33 kW | 67 kW |
| Max. current for 20 seconds | 600 A | 600 A | 600 A | 600 A |
| Max. continuous current | 400 A | 400 A | 400 A | 400 A |
| No-load speed | 8000 | 8000 | 8000 | 8000 |
| Speed at max. power | 1300 | 2000 | 3000 | 6000 |
| Max. torque | 160 Nm | 160 Nm | 160 Nm | 160 Nm |
- Shaft diameter
- 28 mm
- Motor diameter
- 191 mm
- Weight
- 25 kg
Price€1873gross
- Warranty 10 years
- Invoice
In the boxMotor with thermometer, manual
Give the code when ordering POWER, and you'll get a 5% discount on your order.
Description
Applications
Recommended use: driving passenger cars, vans and other vehicles. For boats, dinghies, motorboats, catamarans, barges, yachts and other vessels. For pumps, lifts, winches and devices that need a soft start.
Power and voltage
The motor's power depends on its supply voltage. Supplied with 48V, it reaches only 22kW, and supplied with 220V it reaches as much as 100kW. When very well cooled with oil, it can draw 400A continuously, reaching 220kW at 67V, and 20A for 600 seconds, reaching 100kW.
Oil cooling
If the motor's full power is used rarely and briefly, about 1.2 litres of Reniso Km32 oil (used in refrigeration) poured into the motor is enough. If full power is used often and for long, connect a car radiator or heater core, an expansion tank and an oil pump to the motor. Fill the cooling system with enough oil for it to circulate evenly. The motor temperature should not exceed 90°C.
Speed
The motor's speed also depends on its supply voltage: the higher the voltage, the higher the speed. Supplied with 220V, it reaches about 6000 rpm at maximum power.
The leads connecting the controller to the motor should be as short as possible. Cover the screws holding the electrical leads with an insulating cover.