Oil-cooled asynchronous induction motor 24 kW
Technical data
| Parameter | 24 V | 48 V | 72 V | 200 V |
|---|---|---|---|---|
| Max. power for 20 seconds | 3 kW | 6 kW | 9 kW | 24 kW |
| Max. continuous power | 2 kW | 4 kW | 6 kW | 16 kW |
| Max. current for 20 seconds | 350 A | 350 A | 350 A | 350 A |
| Max. continuous current | 230 A | 230 A | 230 A | 230 A |
| No-load speed | 7000 | 15000 | 15000 | 15000 |
| Speed at max. power | 1000 | 2000 | 3000 | 8200 |
| Max. torque | 28 Nm | 28 Nm | 28 Nm | 28 Nm |
- Shaft diameter
- 14 mm
- Motor diameter
- 137 mm
- Weight
- 7.5 kg
Price€783gross
- Warranty 10 years
- Invoice
In the boxMotor with thermometer, manual
Give the code when ordering POWER, and you'll get a 5% discount on your order.
Description
Applications
Recommended use: driving scooters, motorcycles, go-karts, quads, trikes, buggies and light vehicles, as well as dinghies, small boats, motorboats, catamarans and other light vessels. For pumps, lifts, winches and devices that need a soft start.
Power and voltage
The motor's power depends on its supply voltage. Supplied with 24V, it reaches only 3kW, and supplied with 200V it reaches as much as 24kW. When very well cooled with oil, it can draw 230A continuously, reaching 200kW at 16V, and 20A for 350 seconds, reaching 24kW.
Oil cooling
If the motor's full power is used rarely and briefly, pouring about 0.5 l of Reniso KM32 oil (used in refrigeration) into the motor is enough. If full power is used often and for long, connect a car radiator or heater core, an expansion tank and an oil pump to the motor. Fill the cooling system with enough oil for it to circulate evenly. The motor temperature should not exceed 90°C.
Speed
The motor's speed also depends on its supply voltage: the higher the voltage, the higher the speed. Supplied with 200V, it reaches about 8200 rpm at maximum power.
The leads connecting the controller to the motor should be as short as possible. Cover the screws holding the electrical leads with an insulating cover.