Induction controller 37 kW
Technical data
| Maximum power | 37 kW |
|---|---|
| Supply voltage | 18–90 V |
| Maximum current for 20 s | 520 A |
| Max. continuous current draw | 200 A |
- Length
- 26 cm
- Width
- 16 cm
- Height
- 8.5 cm
- Weight
- 2.6 kg
Price€632gross
- Warranty
- Invoice
In the boxController, encoder, potentiometer, manual
Give the code when ordering POWER, and you'll get a 5% discount on your order.
Description
Applications
With this device you can smoothly control the speed of a scooter, motorcycle, go-kart, boat, car or other vehicle.
Speed control
Electronic controller for induction motors, providing smooth control of the motor speed.
- To draw heat away from the controller housing, fix the device to the vehicle's metal frame or to a heat sink with a fan.
- Connect the induction motor to terminals A, B and C.
- Make the connections with cable of at least 50mm2.
- Connect the supply minus to terminal B-.
- Connect the supply plus to terminal B+.
- Insert the plug of the potentiometer cable into socket J2.
- Connect the switch, with a 2A fuse in series, to the red wire and to terminal B+; make all connections according to the drawing in the manual
- The switch turns the motor on and off at any moment of operation.
- To switch the motor back on, turn the potentiometer down to zero.
- A 500A fuse should also be connected to the power supply.
- After longer continuous operation, check how hot the controller housing and terminals A, B, C get.
- If the wire terminals or the housing are too hot to hold in your hand, they can be cooled with a fan.
The leads connecting the controller to the motor should be as short as possible. They are best joined by soldering, with heat-shrink tubing put over the soldered joint.
Ask about induction controller 37 kW