BLDC drive kit 12 kW 28 Nm
Technical data
| Supply voltage | 18–90 V |
|---|---|
| Max. power for 20 seconds | 12 kW |
| Max. continuous power | 6 kW |
| Max. current for 20 seconds | 180 A |
| Max. continuous current | 90 A |
| No-load speed | 7500 rpm |
| Speed at max. power | 5300 rpm |
| Max. torque | 28 Nm |
| Weight | 11.2 kg |
Motor
View| Type | BLDC |
|---|---|
| Power | 30 kW |
| Torque | 46 Nm |
| Weight | 10.3 kg |
Controller
View| Type | BLDC |
|---|---|
| Power | 12 kW |
| Voltage | 18–90 V |
| Current | 200 A |
| Weight | 0.9 kg |
Price€1152gross
- Warranty
- Invoice
In the boxMotor, controller with potentiometer, manual
Give the code when ordering POWER, and you'll get a 5% discount on your order.
Description
Applications
Recommended use: driving scooters, motorcycles, go-karts, quads, trikes, buggies, light vehicles, or dinghies, small boats, motorboats, catamarans and other light vessels. For pumps, lifts, winches and devices that need a soft start.
Air cooling
The motor's power depends on cooling: the better it is cooled, the longer it runs at full power. For more cooling, two strong fans can be fitted on the sides of the motor.
Power and current
When the motor is very well cooled, it can draw 90A continuously without a break, reaching 6kW, and 20A for 180 seconds, reaching 12kW. The motor temperature must not exceed 90°C.
Speed
The motor's speed depends on the voltage: the higher the voltage, the higher the speed. Supplied with 90V, it reaches about 5300 rpm at maximum power.
The leads connecting the controller to the motor should be as short as possible. They are best joined by soldering, with heat-shrink tubing put over the soldered joint.