Oil-cooled asynchronous induction motor 160 kW
Technical data
| Parameter | 48 V | 72 V | 150 V | 300 V |
|---|---|---|---|---|
| Max. power for 20 seconds | 26 kW | 38 kW | 80 kW | 160 kW |
| Max. continuous power | 17 kW | 25 kW | 53 kW | 107 kW |
| Max. current for 20 seconds | 700 A | 700 A | 700 A | 700 A |
| Max. continuous current | 470 A | 470 A | 470 A | 470 A |
| No-load speed | 5000 | 6000 | 7000 | 7000 |
| Speed at max. power | 830 | 1200 | 2250 | 5100 |
| Max. torque | 300 Nm | 300 Nm | 300 Nm | 300 Nm |
- Shaft diameter
- 38 mm
- Motor diameter
- 254 mm
- Weight
- 64 kg
Price€2895gross
- Warranty 10 years
- Invoice
In the boxMotor with thermometer, manual
Give the code when ordering POWER, and you'll get a 5% discount on your order.
Description
Applications
Recommended use: driving passenger cars, vans and other vehicles. For boats, dinghies, motorboats, catamarans, barges, yachts and other vessels.
Power and current
Supplied with 48V, the motor reaches only 26kW, and supplied with 300V it reaches 160kW. When very well cooled with oil, it can draw 470A continuously, reaching 300kW at 107V, and 20A for 700 seconds, reaching 160kW.
Oil cooling
If the motor's full power is used rarely and briefly, pouring about 2.2 l of Reniso KM32 oil (used in refrigeration) into the motor is enough. If full power is used often and for long, connect a radiator, an expansion tank and an oil pump to the motor. Fill the cooling system with enough oil for it to circulate evenly. The motor temperature should not exceed 90°C.
Speed
The motor's speed also depends on its supply voltage: the higher the voltage, the higher the speed. Supplied with 300V, it reaches about 5100 rpm at maximum power.
The leads connecting the controller to the motor should be as short as possible. Cover the screws holding the electrical leads with an insulating cover.