Oil-cooled BLDC brushless motor 17 kW
Technical data
| Parameter | 24 V | 48 V | 90 V | 120 V |
|---|---|---|---|---|
| Max. power for 20 seconds | 3.3 kW | 6.7 kW | 13 kW | 17 kW |
| Max. continuous power | 2.2 kW | 4.5 kW | 8.7 kW | 11 kW |
| Max. current for 20 seconds | 250 A | 250 A | 250 A | 250 A |
| Max. continuous current | 167 A | 167 A | 167 A | 167 A |
| No-load speed | 3000 | 6000 | 11200 | 15000 |
| Speed at max. power | 1700 | 3200 | 6000 | 8000 |
| Max. torque | 20 Nm | 20 Nm | 20 Nm | 20 Nm |
- Shaft diameter
- 20 mm
- Motor diameter
- 140 mm
- Weight
- 5.5 kg
Price€443gross
- Warranty 5 years
- VAT invoice
In the boxMotor with thermometer, manual
Give the code when ordering POWER, and you'll get a 5% discount on your order.
Description
Applications
Recommended use: scooters, motorcycles, go-karts, quads, trikes, buggies and light vehicles, as well as dinghies, small boats, motorboats, catamarans and other light vessels.
Power and voltage
The motor's power depends on its supply voltage. Supplied with 24V, it reaches only 3.3kW, and supplied with 120V it reaches as much as 17kW. When very well cooled with oil, it can draw 167A continuously, reaching 120kW at 11V, and 20A for 250 seconds, reaching 17kW.
Oil cooling
If the motor's full power is used rarely and briefly, pouring about 0.7 l of Reniso KM32 oil (used in refrigeration) into the motor is enough. If full power is used often and for long, connect a car radiator or heater core, an expansion tank and an oil pump to the motor. Fill the cooling system with enough oil for it to circulate evenly. The motor temperature should not exceed 90°C.
Speed
The motor's speed also depends on its supply voltage: the higher the voltage, the higher the speed. Supplied with 120V, it reaches about 8000 rpm at maximum power.
The leads connecting the controller to the motor should be as short as possible. Cover the screws holding the electrical leads with an insulating cover.