Oil-cooled asynchronous induction motor 38 kW
Technical data
| Parameter | 24 V | 48 V | 72 V | 200 V |
|---|---|---|---|---|
| Max. power for 20 seconds | 5 kW | 9 kW | 14 kW | 38 kW |
| Max. continuous power | 3 kW | 6 kW | 9 kW | 25 kW |
| Max. current for 20 seconds | 400 A | 400 A | 400 A | 400 A |
| Max. continuous current | 260 A | 260 A | 260 A | 260 A |
| No-load speed | 4000 | 8000 | 9000 | 12000 |
| Speed at max. power | 1000 | 1700 | 2600 | 7300 |
| Max. torque | 50 Nm | 50 Nm | 50 Nm | 50 Nm |
- Shaft diameter
- 19 mm
- Motor diameter
- 154 mm
- Weight
- 12 kg
Price€1062gross
- Warranty 10 years
- Invoice
In the boxMotor with thermometer, manual
Give the code when ordering POWER, and you'll get a 5% discount on your order.
Description
Applications
Recommended use: driving boats, motorboats, catamarans and other vessels. It can also be fitted to go-karts, scooters, motorcycles, quads, trikes and buggies.
Power and voltage
The motor's power depends on its supply voltage. Supplied with 24V, it reaches only 5kW, and supplied with 200V it reaches as much as 38kW. When very well cooled with oil, it can draw 260A continuously, reaching 200kW at 25V, and 20A for 400 seconds, reaching 38kW.
Oil cooling
If the motor's full power is used rarely and briefly, pouring about 0.8 l of Reniso KM32 oil (used in refrigeration) into the motor is enough. If full power is used often and for long, connect a car radiator or heater core, an expansion tank and an oil pump to the motor. Fill the cooling system with enough oil for it to circulate evenly. The motor temperature should not exceed 90°C.
Speed
The motor's speed also depends on its supply voltage: the higher the voltage, the higher the speed. Supplied with 200V, it reaches about 7300 rpm at maximum power.
The leads connecting the controller to the motor should be as short as possible. They are best joined by soldering, with heat-shrink tubing put over the soldered joint.