BLDC drive kit 6 kW 20 Nm
Technical data
| Supply voltage | 48–86 V |
|---|---|
| Max. power for 20 seconds | 6 kW |
| Max. continuous power | 4 kW |
| Max. current for 20 seconds | 250 A |
| Max. continuous current | 167 A |
| No-load speed | 4200 rpm |
| Speed at max. power | 3200 rpm |
| Max. torque | 20 Nm |
| Weight | 7.6 kg |
Motor
View| Type | BLDC |
|---|---|
| Power | 17 kW |
| Torque | 20 Nm |
| Weight | 5.5 kg |
Controller
View| Type | BLDC |
|---|---|
| Power | 16 kW |
| Voltage | 48–86 V |
| Current | 220 A |
| Weight | 2.1 kg |
Price€861gross
- Warranty
- Invoice
In the boxMotor, controller with potentiometer, manual
Give the code when ordering POWER, and you'll get a 5% discount on your order.
Description
Applications
Recommended use: scooters, motorcycles, go-karts, quads, trikes, buggies and light vehicles, as well as dinghies, small boats, motorboats, catamarans and other light vessels.
Oil cooling
If the motor's full power is used rarely and briefly, pouring about 0.7 l of Reniso KM32 oil (used in refrigeration) into the motor is enough. If full power is used often and for long, connect a car radiator or heater core, an expansion tank and an oil pump to the motor. Fill the cooling system with enough oil for it to circulate evenly. The motor temperature must not exceed 90°C.
Power and current
When the motor is supplied with 86V and very well cooled with oil, it can draw 167A continuously, reaching 4kW, and 20A for 250 seconds, reaching 6kW.
Speed
The motor's speed depends on the voltage: the higher the voltage, the higher the speed. Supplied with 86V, it reaches about 3200 rpm at maximum power.
The leads connecting the controller to the motor should be as short as possible. Cover the screws holding the electrical leads with an insulating cover.